RFMCO represents Hexonic heat exchangers in CA and Northern NV, including shell & tube, brazed plate and frame heat exchangers for commercial applications

Hexonic is a family-owned company in Poland founded in 1988, manufacturing heat exchangers and pressure vessels. As of 2024, Hexonic assembles all its heat exchangers in South Carolina, allowing for shorter lead times to California and Nevada. And all heat exchangers are assembled in accordance with ASME codes.

Download Product Catalog

Model HAD Shell & Coil Heat Exchangers 

Easy installation

Saving space

Low operating costs

High efficiency

Made according to PED and ASME codes

Applications  

HVAC systems

Steam applications

Heating and cooling systems

Heat exchange in industrial processes

Oil coolers

Working Parameters  

Max. temperature: 482 ° F

Min. temperature: -4°F

Max. pressure: 363 PSI

Model H Shell & Coil Heat Exchangers 

Saving space - compact size and vertical installation reduce space needs for installation

High efficiency - higher heat exchange coefficient from corrugated tubes that increase flow turbulence and intensify heat exchange

Made according to PED codes

Applications

HVAC systems

Steam applications

Food industry

Brewing industry

Beverage manufacturing

Oil manufacturing

Clean-In-Place (CIP) stations

Chemical industry

District cooling

Cooling systems

Working Parameters

Tubes

Max. temperature: 392°F

Max. pressure: 232 PSI

Shell

Max. temperature: 392°F

Max. pressure : 232 PSI

Model RAD Shell & Coil Heat Exchangers 

Optimized for modern A2L refrigerants like r32, r452b, r454b and propane r290

Highly resistant to corrosion – made of high-alloy austenitic stainless steel

Easy assembly and small footprint

High thermal efficiency with high-performance superheating used with well, river, lake water

Even refrigerant distribution with low maldistribution risk

Manufactured in accordance with ASME, PED codes

Proven technology with thousands of units operating in the field

Applications

Ground source heat pumps

Working Parameters  

Shell side (water)

Max. Pressure: 232 PSI

Max. Temperature: 392 °F

Coil side (refrigerant)

Max. Pressure: 652 PSI

Max. Temperature: 266 °F

Model DNA Shell & Tube Heat Exchangers 

Significantly higher heat transfer rates comparing to standard solutions

More efficient operation in high volume applications (e.g. flue gas, hot air, low pressure steam)

High mechanical resistance

The construction enables to obtain smaller, much lighter and material saving device

Features

Effective turbulent and vortex flow

Increases heat transfer coefficient up to double values

Effective heat transfer area

Homogeneous distribution of flow and velocity field

Flexible tube bundle

Low pressure drop

No dead spots

Baffle-free

No need of shell compensator

Elimination of vibration

Large heat transfer area in compact construction

Ideal for high volume media

Applications

Low pressure steam condensers

Industrial and chemical processes

Recuperation and regeneration in industrial technologies

Waste heat recovery - diesel and gas engines, cogeneration

Water and steam systems, cooling circuits

Working Parameters  

Max. temp.: 397°F /203°C

Min. temp.: -4°F /-20°C

Max. pressure: Shell side: 145 PSI /10 bar & Tubes side: 232 PSI /16 bar

Model P-Line Shell & Coil Heat Exchangers 

Designed to operate in pharmaceutical production, meets the highest hygienic standards

3-A certified

Manufactured in accordance with cGMP, PED, ASME codes

Double tube sheet protect pharmaceutical products before mixing it with the other medium

Surfaces have been polished to Ra ≤ 0.5 µm roughness for precise cleaning

Made entirely of stainless steel

One, two or four-pass design

Horizontal and vertical models available

Applications

WFI generator

WFI hot storage and distribution

WFI cold storage and distribution

WFI point of use

Clean steam generation

Food industry

Diary industry

Brewing industry

Working Parameters  

Tubes

Max. temperature: Viton: 284°F & Silicon: 249°F*

Min. Temperature: Viton: 1.4°F* & Silicon: -°F

Max. pressure: Viton: 145PSI & Silicon: 145PSI

Shell: 

Max. Temperature: 392°F

Min. Temperature: -13°F

Max. Pressure: 145 PSI

Model JAG Plate Heat Exchangers

High thermal performance

Technical solutions facilitating the exchanger installation and operation

Select proper installation operating parameters using accurate heat plate sizing

Heating plates made of stainless steel or titanium

Dismountable design

Applications

Chemical industry

Food & bev industry

HVAC-R

Iron & steel industry

Pulp & paper industry

Marine industry

Power

Pharmaceutical industry

Technical Updates  

Additionally corrugated distribution area is designed to enhance turbulent flow in the entrance part of the plate. It also allows even flow through the plate which increases heat transfer by optimal use of its surface area. Specifically corrugated distribution area strengthens the plate and increases the stability of the whole construction. Carefully designed groove together with specially modelled gasket makes the exchanger withstand high pressure.

Triple Plate Positioning System Features

Gasket aligning system – special protruding

Elements align the plates in relation to one another

Point locking system – dedicated corrugated

Elements on the plate

Stellar suspending system – alignment in position to the upper and lower bar

The Finite Element Method Analysis (FEM) optimized the design of the JAG plate heat exchanger in terms of strength, mainly by improving the stress distribution on the cover plates and modifying the location of the fasteners, which contributed to the extension of the operating parameters.

Gaskets Patented Hybrid Lock System

Lock-in method

Lock-on method

Optimized unique shape of the gasket

Highest production standards

Model JAG Plate Heat Exchanger Design

Metal roller

Connection size: DN32 to DN250

Special profile of carrying bar

Front and rear plate available in various colors

Additional front feet

Sliding sleeve

Lock washer

Other frame elements made of galvanized or stainless steel

U-LEG

Model JAG Plate Heat Exchanger Working Parameters  

Max. pressure: 150, 250, 300, 400 PSI

Max. temperature:  300˚F

Min. temperature: -4˚F

Model ST Tube-in-Tube Heat Exchangers

ST tube-in-tube heat exchangers find their application where fluids of high viscosity, density or high fiber or solid particle contamination are subjected to heat treatment, e.g. at wastewater treatment plants.

Applications

Dismountable design

Option to increase heat exchange surface

Stainless steel make

Broad range

Tube-in-Tube Features

The single section of the ST exchanger consists of two tubes with different nominal diameters.

The tube with smaller diameter (product side) is installed inside the tube with the larger diameter (shell side).

Hexonic heat exchangers offer efficient heat transfer utilizing fewer resources. Customers around the world have reduced costs, saved time and made a positive impact on the environment using Hexonic heat exchangers.

Contact us for Hexonic heat exchangers in California: https://www.rfmacdonald.com/contact/

heat exchangers